Automatic Gate Openers for Every Door and Gate Type
From a 1.2 meter glass swing door to a 6 meter industrial gate, EASCO builds the drive that fits. Our range covers concealed floor operators, side mounted and horizontal arm openers, rack and pinion sliding operators, and heavy duty systems for gates up to 1,000 kg (2,200 lb). Every model runs a low voltage DC motor, so the moving gate never carries mains power.
Gate Opener Selection
Five drive systems, each engineered for a different gate weight, width and mounting position.
ヘビーデューティードアオープナー
頑丈な振動ドア オペレータ。 大型大型ドア用高トルク構造 障害物の安全保護の信頼できる及び耐久の性能。 産業、商業重い振動ドアの適用のための理想.
サイドマウントドアオープナー
側面土台の振動ドア オペレータ。 オーバーヘッドスペースを占有することなく、コンパクトなサイドインストール。 滑らかな静かな操作、作り付けの障害物検出。 商業および住宅の振動ドアのアクセスのプロジェクトのために合います.
横のドアのオープナ
横の土台の振動ドア オペレータ。 きちんとした取付けのための横のレイアウト。 反衝突の保護の低い騒音の動きを滑らかにします。 住宅・商業用スイングドアへのアクセス制御機能.
棚およびピニオンの引き戸オペレータ
ラック・アンド・ピニオンの引き戸オペレータ。 強力で安定した操作のための強い棚のピニオン ドライブ。 安全妨害の検出と動く低雑音。 頑丈な産業及び商業スライド ドアのために適した.
床の振動ドア オペレータ
床の振動ドア オペレータは床のレベル-腕、柵無し、目に見えるハードウェアの下で完全に取付けます。 ハンドルは250のkgまでのゲートを左舷に取ります。作り付けのBluetoothおよび4G.
What Is an Automatic Gate Opener?
An automatic gate opener is a motor and control system that opens and closes a door or gate on command. The command can come from a remote, a push button, a card reader, a face recognition terminal or a timed schedule. The motor turns that signal into controlled movement. It opens the gate, holds it for a set time and closes it again safely.
The right opener depends on how your gate moves and what it weighs: Glass and architectural swing doors up to 250 kg: the Floor Swing Door Operator sits fully concealed below floor level. Swing leaves where floor installation isn't possible: the Side Mounted and Horizontal Door Openers mount on the frame. Sliding gates from 80 to 1,000 kg: the Rack and Pinion Sliding Door Operator drives them along the track. Wide, heavy swing gates up to 800 kg: the Heavy Duty Door Opener, used on industrial sites.
Key Features of EASCO Gate Openers
Why installers and property managers specify EASCO drives.
Low Voltage Where People Touch the Gate
Mains power is converted to 24 to 36VDC inside the control unit before it reaches the motor. Anyone standing at the gate, including the installer, is never exposed to mains voltage.
One Drive System for Each Gate Type
Glass doors, side swing leaves, sliding gates and heavy industrial gates each get a purpose built mechanism. No single motor is stretched to fit every job.
Heavy Duty Drives Rated for 5 Million Cycles
Industrial models handle gates up to 1,000 kg with up to 169 Nm of output torque. They are rated for 5 million operating cycles, for sites that open their gates hundreds of times a day.
Where EASCO Gate Openers Are Used
From polished lobbies to heavy perimeter gates.
工場紹介
紙の製紙の製紙方針は、門に支障のない作業者を止めず、ネットワークを越えた積み込みドックで固定ターミナルが出席を記録できません。 このシナリオでは、EASCOの工場アクセス管理システムがギャップを閉じる方法を示します。 .
空港
制限付きエアサイドドアは、スタッフの入り口よりも厳格な身元確認が必要で、オペレーターなしで時計周りのスタッフの車両ゲートが走っています。 このシナリオでは、EASCO 空港アクセス制御が 1 つのプラットフォーム上の両方のゾーンを保護する方法を示しています.
政府機関
パブリックカウンターでは、スループット、制限されたレコードルームでは、厳格なアイデンティティチェックが必要で、調達には完全な文書が必要です。 このシナリオでは、EASCOが1つの政府の建物のアクセス管理システムで3つすべてをカバーする方法を示しています.
Frequently Asked Questions
Answers to typical engineering and deployment questions.
EASCO gate openers cover door widths from 1.2 to 6 meters and gate weights from 100 kg (220 lb) up to 1,000 kg (2,200 lb): Horizontal Door Opener: light leaves up to 100 kg Floor Swing Door Operator: up to 250 kg Heavy Duty Door Opener: swing gates up to 800 kg Rack and Pinion Sliding Door Operator: sliding gates up to 1,000 kg
A 24V DC opener keeps the motor and wiring at the gate at low voltage. That reduces shock risk for users and installers. DC motors also start and stop smoothly under electronic control, which is easier on the gate hardware.
The Floor Swing Door Operator is best for glass doors. It installs completely below floor level, handles doors up to 250 kg with 56 Nm of output torque, and leaves no visible arm or motor housing. That keeps frameless glass entrances clean.
Swing openers suit gates with clear space to open inward or outward, and glass or architectural doors. Sliding operators suit heavy, wide or sloped driveways where there is no room for a leaf to swing. The rack and pinion drive moves the gate along its track at 0.2 to 0.3 meters per second.
Yes. EASCO gate openers accept open signals from remotes, push buttons, keypads and access control readers, including EASCO face recognition terminals. One supplier can deliver both the verification device and the drive for a complete controlled entrance.
Every EASCO gate opener includes a manual release, so the gate can be unlocked and moved by hand if power is lost. Ask our engineers about backup power options for sites where the gate must keep operating during an outage.
Ready to Move Forward?
Tell us your gate type, dimensions, and weight, and we'll confirm the right model. EASCO's confirmed gate opener range starts with the fully concealed Floor Swing Door Operator, factory direct from Shenzhen.
Hattie Huang
Senior Engineer at EASCO
Hattie Huang brings 20+ years of engineering turnstiles, having guided 500+ brands in gate openers to turnstile solutions.
talk to an expertNot Sure What You Need?
Discuss environment parameters and requirements with a product expert.
Expert Consultation Scheduled
Thank you. Your project brief has been recorded. An English-speaking access controller analyst will contact you at your preferred time.