Stainless Steel Turnstile — Built for Outdoor and High-Corrosion Sites
Built for environments where aluminum corrodes from salt air, industrial contamination, and constant moisture. Seven models across speed gates, swing gates, and full-height turnstiles.
Stainless Steel Turnstile Selection
Direct factory sourcing for our premium stainless steel turnstile systems.
Full Height Turnstile gate（Dual-channel）
EASCO full height turnstile — 360° anti-climb enclosed cross gate, 304 stainless steel, servo drive, 30 persons/min. Factories, construction sites, prisons, industrial parks. Factory direct Shenzhen.
Stainless Steel Rounded Corner Swing Gate
EASCO rounded corner swing gate — 50 persons/min, <0.5s opening, 10M-cycle brushless motor, SUS304 curved corners, anti-collision design. Indoor and outdoor. Factory direct Shenzhen.
Stainless Steel Rounded Corner Speed Gate
EASCO rounded corner stainless steel speed gate — 50 persons/min, <0.5s opening, 15M-cycle servo drive, SUS304 round-tube frame. Office buildings, hotels, airports. Factory direct Shenzhen.
Stainless Steel Right-Angle Swing Gate
EASCO right-angle swing gate — 50 persons/min, <0.5s opening, 15M-cycle servo planetary drive, SUS304 body, 6 infrared pairs. Indoor and outdoor. Factory direct Shenzhen.
Full Height Turnstile gate（Single-channel）
EASCO full height turnstile — 360° anti-climb enclosed cross gate, 304 stainless steel, servo drive, 30 persons/min. Factories, construction sites, prisons, industrial parks. Factory direct Shenzhen.
Fengying Stainless Steel Speed Gate
EASCO Fengying stainless steel speed gate — 50 persons/min, <0.5s opening, 15M-cycle brushless motor, SUS304 body. Office parks, campuses, hospitals. Factory direct Shenzhen.
Fengyi Stainless Steel Swing Gate(fengchang 168)
EASCO Fengyi 168 swing gate — 40 persons/min, <0.6s opening, gas-strut assisted maintenance lid, SUS304 + aluminium alloy body. Indoor and outdoor. Factory direct Shenzhen.
Stainless Steel Swing Gate(Fengchang 108)
EASCO Fengchang 108 swing gate — 50 persons/min, <0.5s opening, 15M-cycle brushless motor, SUS304 outer cylinder. Indoor and outdoor use. Card, QR, face recognition. Factory direct Shenzhen.
What Is a Stainless Steel Turnstile?
A stainless steel turnstile is a pedestrian access gate built from SUS304 stainless steel rather than aluminum, chosen specifically to withstand salt spray, moisture, and industrial contamination without corroding. Stainless gates weigh more and cost more than aluminum equivalents, a deliberate spec choice for outdoor and high-stress sites, not the default for a standard indoor lobby.
Speed gates retract into the body for compact, high-throughput entry. Swing gates open on a hinge for wider passages and an accessible lane; the Fengyi 168 reaches 1,500mm. Full-height turnstiles run floor to ceiling with a rotating cross-arm, the range's maximum physical deterrent. All formats accept face recognition, card readers, QR scanners, and ID card modules.
Key Features of EASCO Stainless Steel Turnstiles
Standard high-availability features built into every model.
SUS304 Holds Up Where Aluminum Fails
Precision-formed 304-grade stainless the same specification used in food processing equipment and coastal infrastructure. No rust, no pitting, no repainting schedule.
Three Formats, One Supplier
Speed gates for throughput, swing gates for wider accessible lanes, full-height for structural security all in-house EASCO product lines from one factory.
Fire Emergency Release Built In
Every model connects to the fire alarm system. Power cut triggers automatic opening and hold-open lock; the ARM controller retains gate position, so no recalibration is needed after an outage.
Where Stainless Steel Turnstiles Are Used
Ideally suited for demanding layouts where security meets environmental challenges.
Factories
A written sober-only policy doesn't enforce itself, and a loading dock outside network range can't run on a fixed terminal alone. This profile covers how EASCO addresses both.
Government
Public counters need throughput. Restricted records rooms need a tighter tolerance. Procurement needs documentation. This profile covers all three.
Airports
A restricted airside zone needs tighter biometric tolerance than a staff entrance. This profile covers how EASCO addresses both zones.
Frequently Asked Questions
Answers to typical engineering and deployment questions.
The Rounded Corner Speed Gate, Fengchang 108, Fengyi 168, Right-Angle Swing Gate, Rounded Corner Swing Gate, and Full-Height Turnstile are all rated for indoor and outdoor use. The Fengyi Speed Gate is rated for indoor use only. For fully exposed coastal or marine environments, confirm the specific model with EASCO before ordering.
Speed gates and most swing gate models process 50 persons per minute with sub-0.5-second opening times. The Fengyi 168 processes 40 persons per minute at under 0.6 seconds. The Full-Height Turnstile processes 30 persons per minute with a 1–2 second cycle time.
The standard model uses a DC servo + planetary gear drive rated for 15 million cycles, operating from -20°C to +75°C. A lighter "Fengjie" variant is referenced with a 5-million-cycle brushless motor and a narrower -10°C to +50°C range. Verification Required: this variant does not currently have a dedicated product page confirmed in this cluster.
Yes, face recognition terminals, card readers, QR code scanners, and ID card modules are available as add-ons across every model. Face recognition panels process 50,000 enrolled faces at 200–300ms recognition speed with 99.98% accuracy.
It's a 360° enclosed cross-turnstile; the rotating arm spans the full passage height, and passing without completing the rotation cycle isn't possible. Used at construction sites, prisons, and access points where security needs to be structural, not just electronic. Throughput is lower (30/min) than the speed and swing gate formats, a deliberate trade-off for the added physical security.
Standard orders ship within the quoted production window from EASCO's Shenzhen facility. Contact EASCO via WhatsApp (+86 13711422283) to confirm lead time based on model and volume.
Ready to Move Forward?
Tell us your site environment and security requirements, and we'll confirm the right model. EASCO manufactures stainless steel turnstiles across seven models — speed gates, swing gates, and full-height — all SUS304 construction, factory direct from Shenzhen.
Hattie Huang
Senior Engineer at EASCO
Hattie Huang brings 20+ years of engineering tunrnstiles, having guided 500+ brands in gate openers to turnstile solutions.
Not Sure What You Need?
Discuss environment parameters and requirements with a product expert.
Expert Consultation Scheduled
Thank you. Your project brief has been recorded. An English-speaking access controller analyst will contact you at your preferred time.