Aluminum Alloy Turnstile
Speed gates designed for lobbies where security has to look as good as the interior around it. Six factory direct series open in under 0.5 seconds on most models, run on 15 million cycle brushless motors, and fit anything from a compact retrofit to a flagship headquarters entrance.
Aluminum Alloy Turnstile Selection
Six series covering slim retrofits, wide accessible lanes and silent premium lobbies.
Mini Speed Gate(JBH )
EASCO JBH mini speed gate — 50 persons/min, <0.5s opening, 15M-cycle brushless motor. One-third smaller than standard speed gates. Tight spaces and retrofit projects. Factory direct Shenzhen.
Water Drop Speed Gate(JC2)
EASCO JC2 water drop speed gate — 50 persons/min, <0.5s opening, shared centre-column design saves space. Indoor use. Card, QR, face recognition optional. Factory direct Shenzhen.
Waterproof Aluminum Alloy Speed Gate（JFW）
EASCO JFW waterproof speed gate — IP65-rated, 50 persons/min, <0.5s opening, 15M-cycle motor. Indoor and outdoor use. Face recognition, card, QR. Factory direct Shenzhen.
Aluminum Alloy Single Arm Gate(JY)
EASCO JY single arm turnstile gate — 30 persons/min, passage width 550–1700mm, stainless steel arm, factory, community and campus access control. Factory direct Shenzhen.
Aluminum Alloy Speed Gate(JF4 )
EASCO JF4 speed gate — 50 persons/min, <0.5s opening, 15M-cycle brushless motor. Office parks, campuses, hospitals. Face recognition, card, QR. Factory direct Shenzhen.
Aluminum Alloy Speed Gate（JFX）
EASCO JFX speed gate — 50 persons/min, <0.3s opening, 15M-cycle direct-drive servo motor. Indoor use. Face recognition, card, QR and ID card. Factory direct from Shenzhen.
What Is an Aluminum Alloy Turnstile?
An aluminum alloy turnstile is a pedestrian speed gate with a cabinet built from extruded aluminum instead of steel. It is lighter to ship and install, easy to shape into slim, rounded profiles, and naturally resistant to corrosion indoors. That makes it the preferred choice for corporate lobbies, office towers, hotels and institutional entrances, where the gate is part of the interior design.
How to choose within the range: Compact JBH: fits tight retrofits with 550 to 900mm lanes. JC2 Water Drop: opens up to 1,200mm for luggage and wheelchairs. JY Single Arm: covers passages up to 1,700mm. JF4 and JFX: premium lobby gates. The JFX opens in under 0.3 seconds at under 40 dB. JFW Waterproof: the one IP65 rated series, for covered outdoor entrances. Fully exposed sites: choose our stainless steel turnstiles instead.
Key Features of EASCO Aluminum Alloy Turnstiles
Engineered for lobbies that run all day and are judged by how they look.
15 Million Cycle Brushless Motors
Every series is rated for 15 million open and close cycles. That is years of continuous commercial traffic without motor replacement or loss of speed.
50 Persons per Minute, Quietly
Five of six series move 50 people per minute. The JF4 and JFX run below 50 dB and 40 dB respectively, so the lobby stays calm at peak hours.
Fire Alarm Release Built In
The control board links directly to the building fire alarm. If power fails or an alarm triggers, the flaps open automatically and lock open for a clear evacuation route.
Where Aluminum Alloy Turnstiles Are Used
Ideally suited for demanding layouts where security meets environmental challenges.
Government
Public counters need throughput, restricted records rooms need a stricter identity check, and procurement needs complete documentation. This scenario shows how EASCO covers all three with one government building access control system.
Factories
A sober shift policy on paper cannot stop an impaired worker at the gate, and a fixed terminal cannot record attendance at a loading dock beyond the network. This scenario shows how one factory access control system from EASCO closes both gaps.
Airports
A restricted airside door needs a stricter identity check than a staff entrance, and staff vehicle gates run around the clock without an operator. This scenario shows how EASCO airport access control secures both zones on one platform.
Frequently Asked Questions
Answers to typical engineering and deployment questions.
Yes. EASCO aluminum alloy turnstiles use rigid extruded cabinets and 15 million cycle brushless motors, built for continuous commercial traffic. Aluminum is chosen for its weight and design flexibility, not as a compromise on durability indoors.
Only the JFW Waterproof series is IP65 rated for covered outdoor entrances. For fully exposed, coastal or industrial sites, EASCO recommends its SUS304 stainless steel turnstiles, which resist salt, rain and chemical exposure.
A speed gate uses two retracting flaps and moves about 50 people per minute. The JY single arm gate swings one long arm across passages up to 1,700mm. It suits wheelchairs, strollers and deliveries, with a throughput of about 30 people per minute.
The JFX is EASCO's quietest aluminum speed gate, running below 40 dB, with flaps that open in under 0.3 seconds. The JF4 follows closely at under 50 dB. Both suit reception areas where gate noise would be noticed.
The gate connects directly to the fire alarm system. On an alarm signal or power loss, the flaps open automatically and stay open, giving a free exit route. Normal operation resumes once the system is reset.
Yes. Cabinet color, flap material and reader mounting can be customized to your interior, and wide lane or multi lane layouts are available. Share your drawings and our engineers will propose a configuration.
Ready to Move Forward?
Tell us about your project and our engineers will recommend the right turnstile series, lane configuration, and access control options.
Hattie Huang
Senior Engineer at EASCO
Hattie Huang brings 20+ years of engineering turnstiles, having guided 500+ brands in gate openers to turnstile solutions.
Not Sure What You Need?
Discuss environment parameters and requirements with a product expert.
Expert Consultation Scheduled
Thank you. Your project brief has been recorded. An English-speaking access controller analyst will contact you at your preferred time.